Get Them While They're Hot!
Displaying 1 to 15 (of 1878 items)
Result Pages: 126
Brand: waddell
Mushroom plug 5/16
$18.00
Buy.com
See More
Brand: waddell
Screw hole button plug Oak 1 diameter
$18.00
Buy.com
See More
Brand: DrillSpot
Jam Nuts are often used to lock or jam something in place without clamping against another object; Jam Nuts are typically low profile compared to a standard nut. Grade A per ASTM A563 hardness: HRB 68 Minimum. Thread Dimensions ANSI B1.1 UNC and UNF Class 2B. Galzanized plating, made of layers of zinc-iron, protects the bolt from corrosion; typically used in outdoor applications.
$76.00
Buy.com
See More
Brand: DrillSpot
Threads are molded into the nylon insert locking the bolt into place. Nylon Insert Lock Nuts typically have a cased metal outside formed into a hex pattern easily torqued by a wrench or socket; heavy pattern nuts have an oversized case. Grade A. ASME B1.1 Class 2B thread requirement. Zinc plating, retards the corrosion rate in a normal atmosphere.
$130.00
Buy.com
See More
Brand: CR Laurence
Color: Zinc Length: 4-1/2 (114.3 mm) Easily Permits Standoff Cap Assemblies to be Tightened or Loosened Can be Used for Either 3/4 or 1-1/4 (19 or 31.7 mm) Standoff Cap Assemblies The CRL Standoff Wrench for 3/4 and 1-1/4 Cap Assemblies was specifically designed to be used during installation of the CRL Standoff Display System. The curved end of the Wrench fits around the Standoff Cap and into the slot in the edge, allowing the Cap to be easily tightened or loosened. One each per package.
$8.00
Buy.com
See More
Brand: CR Laurence
Color: Brushed Stainless Diameter: 1 (25.4 mm) Length: 1 (25.4 mm) Thread : 1/4 -20 Infinite Design Options Including Signage, Furniture and Retail Display Made From 316 Stainless Steel and Available in Two Finishes Accomplish Your Design Objective by Choosing Any of Several Different LengthsThreaded Completely Through In display or furniture manufacturing, the innovative design achieves maximum exposure and attention.
$14.00
Buy.com
See More
Brand: DrillSpot
Uniquely shaped threads provide a vibration resistant friction fit, so the nut stays put. These all metal locknuts withstand higher temperatures than nylon insert locknuts. Top thread section is deformed to create two or three locking zones; they start easily by hand, then must be wrenched into final position. Grade C equivalent to Grade 8. IFI-100/107 Grade C. ANSI B1.1 UNC or UNF Class 2B thread requirement. Zinc plating, retards the corrosion rate in a normal atmosphere.
$80.00
Buy.com
See More
Brand: DrillSpot
The most versatile and widely used nut, it should be used with any low carbon bolt or screw that is not heat-treated. 18-8 Stainless Steel. ANSI B1.1 UNC and UNF Class 2B thread requirement. Stainless Steel material.
$4.00
Buy.com
See More

« Prev 1 2 3 4 5 6 7 8 9 10125 126 Next »