Get Them While They're Hot!
Displaying 1 to 15 (of 20775 items)
Result Pages: 1385
Brand: Kendall Howard
All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.
$14.00
Buy.com
See More
Brand: DrillSpot
Full Dog and Half Dog Points have an extended tip that fits into a hole drilled in a shaft. Use these for permanent location of one part to another. They often replace dowel pins. Length is measured in overall length including the tip. Often used as adjusting screws, Flat Point, Oval Point, Nylon Tip and Brass Tip screws cause little or no damage to the contact surface. These screws are good for thin wall thickness and soft plugs and designed for frequent resetting and relocating.
$62.00
Buy.com
See More
Brand: DrillSpot
Point Selection should take into account application, holding power, frequency of setting and hardness of mating parts. The Cup Point digs into the contact surface for maximum holding power under pressure. The Knurled Point features better locking power than the standard Cup Point. The Knurled Point combines the digging action of the Cup Point with counter-clockwise locking knurls that have a ratchet-locking action that helps resist loosening, even under the most severe vibrations
$8.00
Buy.com
See More
Brand: Micro-Tools
Metric Screws, Package of 25.
$5.00
Buy.com
See More
Brand: DrillSpot
Socket Head Cap screws are ideal for precision work with close tolerances and applications needing a well tooled appearance. Socket Head Cap screws supply greater tensile strength than equivalent Hex Head Caps screws, while requiring less surface area to counterbore.
$23.00
Buy.com
See More
Brand: DrillSpot
Full Dog and Half Dog Points have an extended tip that fits into a hole drilled in a shaft. Use these for permanent location of one part to another. They often replace dowel pins. Length is measured in overall length including the tip. Often used as adjusting screws, Flat Point, Oval Point, Nylon Tip and Brass Tip screws cause little or no damage to the contact surface. These screws are good for thin wall thickness and soft plugs and designed for frequent resetting and relocating.
$13.00
Buy.com
See More
Brand: DrillSpot
Button Head Socket Cap Screws are designed for light duty applications such as securing guards, covers, and ornamental fixtures. Button Heads present a pleasing appearance to an assembly. Stainless Steel material. Grade 18-8 has the same design advantages as a low carbon bolt, however can be used in environments that require greater atmospheric corrosion resistance.
$7.00
Buy.com
See More
Brand: DrillSpot
Socket Head Cap screws are ideal for precision work with close tolerances and applications needing a well tooled appearance. Socket Head Cap screws supply greater tensile strength than equivalent Hex Head Caps screws, while requiring less surface area to counterbore.
$25.00
Buy.com
See More
Brand: C.R. Laurence
CRL 8 x 3 Pan Head Phillips Sheet Metal Screws (100 Pack). CRL Sheet Metal Screws are bright zinc plated and feature a super sharp point.
$14.00
Buy.com
See More
Brand: DrillSpot
Socket Head Cap screws are ideal for precision work with close tolerances and applications needing a well tooled appearance. Socket Head Cap screws supply greater tensile strength than equivalent Hex Head Caps screws, while requiring less surface area to counterbore.
$28.00
Buy.com
See More
Brand: DrillSpot
Socket Head Cap screws are ideal for precision work with close tolerances and applications needing a well tooled appearance. Socket Head Cap screws supply greater tensile strength than equivalent Hex Head Caps screws, while requiring less surface area to counterbore.
$5.00
Buy.com
See More
Brand: DrillSpot
Point Selection should take into account application, holding power, frequency of setting and hardness of mating parts. The Cup Point digs into the contact surface for maximum holding power under pressure. The Knurled Point features better locking power than the standard Cup Point. The Knurled Point combines the digging action of the Cup Point with counter-clockwise locking knurls that have a ratchet-locking action that helps resist loosening, even under the most severe vibrations
$108.00
Buy.com
See More
Brand: DrillSpot
Socket Head Cap screws are ideal for precision work with close tolerances and applications needing a well tooled appearance. Socket Head Cap screws supply greater tensile strength than equivalent Hex Head Caps screws, while requiring less surface area to counterbore.
$22.00
Buy.com
See More
Brand: DrillSpot
Socket Head Cap screws are ideal for precision work with close tolerances and applications needing a well tooled appearance. Socket Head Cap screws supply greater tensile strength than equivalent Hex Head Caps screws, while requiring less surface area to counterbore.
$192.00
Buy.com
See More

« Prev 1 2 3 4 5 6 7 8 9 101384 1385 Next »